Bulkhead & Soffit Drywall
We hang drywall on bulkheads and soffits: framed boxes that hide ducts, pipes or beams, or drop part of a ceiling.
Or email patleroy6161@gmail.com
About this service
A bulkhead has several faces: a bottom, one or two sides, and the edges where it meets the wall and ceiling. We cut board to fit each face of the box and fasten it to the framing.
Bulkheads are common in basements, where ducts and beams run across the ceiling. Others drop a section of ceiling lower than the rest. Tell us how many bulkheads there are, roughly how long they run and what they hide. If you have drawings, mention them.
What this covers
- Hanging board on framed bulkheads that hide ducts, pipes or beams
- Cutting board to fit each face of the box
- Boarding dropped ceiling sections and soffits
- Basement bulkheads once rough-ins, insulation and vapour barrier are in
- Laying out sheets to keep joints few and well placed
Where we do bulkhead & soffit drywall
Bulkhead & Soffit Drywall: questions
What is a bulkhead, and why would my house have one?
A bulkhead is a framed box on a ceiling or wall. It hides ducts, pipes or beams, or it drops part of a ceiling. Drywall is cut and fastened to each face so it reads as part of the room.
When can drywall go up on a basement bulkhead?
Board goes up after the framing, plumbing, electrical and ductwork rough-ins are done, and the insulation and vapour barrier are in. Hanging before then would cover work that may still need to be checked.
How are screws set on bulkhead faces?
Screws are driven so the head sits just below the paper face without tearing it. They go in at the spacing the board maker and the drawings call for. This applies on narrow bulkhead faces too.
What board goes on a bulkhead in a bathroom or laundry room?
Moisture-resistant board is used in damp rooms such as bathrooms and laundry rooms. It resists moisture but it is not waterproof. Areas that get wet directly, like shower walls, usually call for a different backer board.
Can a bulkhead hiding plumbing be made quieter?
Sound control comes from the whole assembly: denser or thicker board, extra layers, resilient channel, insulation in the cavity and acoustic sealant at gaps. The board is hung to whatever assembly is specified.
Our addition needs a soffit where it meets the old house.
In a home addition, the new space is hung, and new board often has to meet existing walls or ceilings where the addition joins the house. A soffit at that join is cut to fit each face.
Book an on-site quote
Calling is fastest:
(365) 499-0040Email: patleroy6161@gmail.com
Or send the form with the rooms, ceiling heights and timing. Quotes are given on site, so we will arrange a visit.
We install the drywall only. The board is supplied by others, and taping and finishing are done by others.