P.L.R Drywall

Custom Drywall Features

Custom drywall features, such as coffered ceilings, insets and recesses, need many small pieces of board cut, lifted and fastened to the framing.

Coffered ceiling grid with triangular insets, hung and screwed in drywall

About this service

We hang drywall on custom features. Our past work includes coffered ceilings, skylight wells, stairwells and a two-storey window wall, hung from scaffold. A feature like this has many faces and many small pieces. Each piece of board is cut to fit and fastened to the framing that is already in place.

Layout comes before cutting. We lay out sheets to keep joints few and stagger butt joints. That makes taping easier for whoever finishes the walls. We have over 20 years in the trade. If you have drawings of the feature, mention them when you send the form, call (365) 499-0040 or email patleroy6161@gmail.com.

What this covers

  • Hanging board on coffered ceilings, insets and recesses
  • Cutting board to fit each face of a framed feature
  • Laying out sheets to keep joints few and stagger butt joints
  • Hanging feature ceilings, skylight wells and stairwells from scaffold
  • Fastening board to the spacing the board maker and drawings call for

Custom Drywall Features: questions

Do you hang drywall on coffered ceilings?

Yes. Our past work includes houses with coffered ceilings, along with high, vaulted and sloped ceilings. We cut the board, lift it and fasten it to the framing of each part of the coffer.

Why does layout matter so much on a feature with many small pieces?

Every small piece adds joints. Laying out the sheets before cutting keeps joints few and well placed. Fewer and better-placed joints make taping easier for whoever finishes the walls.

Is the ceiling hung before the walls around a feature?

Ceilings are usually hung before walls. The wall sheets then help carry the ceiling edges. The same order applies when the ceiling has a coffer or recess in it.

Can a custom feature include an arch or curved edge?

Curved walls use thin flexible board, often 1/4 inch, sometimes in two layers. Regular board can also be scored or dampened so it bends. Arches are lined with flexible board along the curved underside.

As a builder, where does a feature hang fit in my schedule?

On subcontract work, the builder or general contractor schedules the hang between other trades. It usually comes after rough-ins and insulation and before taping. Feature ceilings follow the same order.

Can a feature ceiling still meet a sound control spec?

Sound control comes from the whole assembly: denser or thicker board, extra layers, resilient channel, cavity insulation and acoustic sealant. Assemblies are often compared by STC rating. The board is hung to the assembly specified.

Book an on-site quote

Calling is fastest:

(365) 499-0040

Or send the form with the rooms, ceiling heights and timing. Quotes are given on site, so we will arrange a visit.

We install the drywall only. The board is supplied by others, and taping and finishing are done by others.

Phone or email, at least one.