P.L.R Drywall

Partition Wall Drywall

Partition wall drywall is board hung on both sides of a non-load-bearing wall that divides a room, basement or office.

About this service

A partition wall is a non-load-bearing wall that divides a space. It is usually boarded on both sides. We hang that board: cut, lifted and fastened to the framing on each face. We have over 20 years in the trade.

Sheets are laid out to keep joints few, with butt joints staggered rather than lined up. If the partition needs to cut sound between rooms, the board is hung to the assembly specified. That can mean denser board, extra layers or resilient channel. Tell us the wall size, any openings and what the wall needs to do. Call (365) 499-0040, email patleroy6161@gmail.com or send the form.

What this covers

  • Hanging board on both sides of non-load-bearing partition walls
  • Layout that keeps joints few and staggers butt joints
  • Hanging to a specified sound control assembly where drawings call for it
  • Partitions in basements, homes and offices, including on steel studs
  • Fire-rated board hung to the listed assembly when specified

Partition Wall Drywall: questions

What exactly is a partition wall?

A partition wall is a non-load-bearing wall that divides a space. It can split one room into two, or close off part of a basement or office. We hang the drywall on it once the framing is in place.

Will a partition wall keep sound from carrying between two rooms?

Sound control comes from the whole wall assembly, not the board alone. Denser or thicker board, extra layers, resilient channel, cavity insulation and acoustic sealant all play a part. We hang the board to the assembly specified.

Can you hang a partition wall to divide my basement?

Yes. In basements, board goes up after the framing, rough-ins, insulation and vapour barrier are in. A partition divides the basement space, and we hang board on it the same way as the other walls.

What has to be finished before you can hang a partition?

Framing, plumbing, electrical and ductwork rough-ins should be done, along with any insulation and vapour barrier. Where a building permit applies, the work behind the board may need inspection before it is covered.

Is mould-resistant board an option for a dividing wall?

Mould-resistant board has a facing, often fibreglass instead of paper, and a core treated to resist mould growth. It does not make a space mould-proof. Moisture in the room still has to be controlled.

Can a dividing wall have a curve in it?

Yes. Curved walls use thin flexible board, often 1/4 inch, sometimes in two layers. Regular board can also be scored or dampened so it bends. Let us know if your partition has a curve.

Book an on-site quote

Calling is fastest:

(365) 499-0040

Or send the form with the rooms, ceiling heights and timing. Quotes are given on site, so we will arrange a visit.

We install the drywall only. The board is supplied by others, and taping and finishing are done by others.

Phone or email, at least one.