P.L.R Drywall

Partition Wall Drywall in Whitby

Both faces of a partition wall need board, and in Whitby we hang each side for builders and general contractors.

Hanging the second face after rough-ins

A partition is usually boarded on both sides. Any wiring or pipes inside it need to be roughed in first. If the assembly calls for insulation, it goes in before both faces are closed.

Few joints on each face

We lay out the sheets on each face to keep joints few. Butt joints are staggered rather than lined up. Screws go in at the spacing the board maker and the drawings call for. This applies on Whitby jobs and in Brooklin, which is part of the Town of Whitby.

What partition wall drywall covers →

Within Whitby

Whitby is part of

Partition Wall Drywall in other areas

Partition Wall Drywall in Whitby: questions

Will a partition wall keep sound from carrying between two rooms?

Sound control comes from the whole wall assembly, not the board alone. Denser or thicker board, extra layers, resilient channel, cavity insulation and acoustic sealant all play a part. We hang the board to the assembly specified.

What does an STC rating mean for a dividing wall?

STC is a rating used to compare how well wall and ceiling assemblies block sound. The rating belongs to the whole assembly. If your drawings name an assembly for a partition, we hang the board to match it.

How are the screws set when you hang board on a partition?

Each screw is driven so the head sits just below the paper face without tearing it. Screw spacing follows what the board maker and the drawings call for on that wall.

Do you hang interior partitions in new houses?

Yes. In new construction, hanging comes once the house is closed in and rough-ins and insulation are done. The partitions that divide the rooms are part of that hang, along with the outside walls and ceilings.

Book an on-site quote

Calling is fastest:

(365) 499-0040

Or send the form with the rooms, ceiling heights and timing. Quotes are given on site, so we will arrange a visit.

We install the drywall only. The board is supplied by others, and taping and finishing are done by others.

Phone or email, at least one.