P.L.R Drywall

Drywall Hanging

Drywall hanging is cutting, lifting and screwing gypsum board to framing, with ceilings first and walls after.

Two P.L.R Drywall installers in branded shirts hanging board on a sloped ceiling

About this service

We usually hang ceilings before walls. The wall sheets then help hold up the ceiling edges. Each sheet is placed to keep joints few. Butt joints are staggered from row to row rather than lined up.

Screws go in at the spacing the board maker and the drawings call for. Each head sits just below the paper face without tearing it. Tall walls are hung from scaffold. Fewer joints make taping easier for whoever finishes the walls. We have over 20 years in the trade.

What this covers

  • Ceilings hung first, so wall sheets help carry the ceiling edges
  • Sheet layout planned to keep joints few and butt joints staggered
  • Screws set just below the paper face at the specified spacing
  • Tall walls, stairwells and high ceilings hung from scaffold
  • Board fastened to wood or steel stud framing with matching screws

Drywall Hanging: questions

What does drywall hanging actually involve?

Hanging, also called boarding, is fastening gypsum board sheets to wall and ceiling framing with drywall screws. The sheets are cut to fit, lifted into place and fastened. Taping and finishing come after as a separate step.

What is a staggered butt joint and why does it matter?

A butt joint is where two sheet ends meet. We stagger them rather than lining them up from row to row. Joints that are better placed are easier to tape than joints stacked into one long line.

Can you hang board on a two-storey wall?

Yes. Tall walls, high ceilings and stairwells are hung from scaffold or lifts. Our past work includes a two-storey window wall and stairwells hung from scaffold.

What has to be done before drywall can be hung?

Board usually goes up after framing, plumbing, electrical and ductwork rough-ins are done, and insulation and vapour barrier are in. Once those are in place, the walls and ceilings are ready to hang.

Can you hang new board next to my existing walls during a renovation?

Yes. Renovation work often means hanging new board next to existing walls and ceilings. The new sheets are fitted where they meet the old surfaces and fastened to the framing behind them.

Should moisture-resistant board be hung in my bathroom?

Moisture-resistant board is used in damp rooms such as bathrooms and laundry rooms. It is not waterproof. Areas that get wet directly, like shower walls, usually call for a different backer board.

Book an on-site quote

Calling is fastest:

(365) 499-0040

Or send the form with the rooms, ceiling heights and timing. Quotes are given on site, so we will arrange a visit.

We install the drywall only. The board is supplied by others, and taping and finishing are done by others.

Phone or email, at least one.